Same great mashtun jacket included with our BREWTREE's. Here's what you get:
3 Pieces of Special Insulating material - cut to fit the main body of a 15 gallon Sankey Keg.
1 Pint of Adhesive
Application Brush
Simply make cutouts in the jacket using common household scissors for all your mashtun accessories (i.e. thermometers, ball valves, etc..). Make sure your accessories are removed from the mashtun before installing the jacket. Coat both the mashtun exterior and the insulating material (sponge side) with the adhesive. Carefully align pieces and push together...it really is that simple. We will be including step by step instructions on our instructions page shortly, complete with pictures.
Note: Cutouts fit a "poly keg" perfectly and will actually encase the poly keg. If using a standard sankey, cutouts will cover the main body and bottom of the keg, but NOT the chime areas, which don't need to be insulated anyways. If you desire a larger piece to cover the chime areas, see our other mashtun jacket options.
