BREWTREE.COM

100 FOOT Double-Coil Immersion Wort Chiller
“THE BEAST”

Instructions

Thank you for purchasing a brand new BREWTREE 100 FOOT Double-Coil immersion Wort Chiller, sure to provide years of dedicated service.

Before Use: The unit should be clean and free of any prior use residue. Any residue may be easily cleaned with hot water. Unit may become a dull brown color with use. Unit may be soaked in a solution of citric acid and water to regain its original shiny appearance.

To use: Chiller May be bent for packaging/shipping purposes only, and can easily be re-bent into position. Be careful not to kink copper tubing when bending. Make wide bends to prevent this from happening. If tubing becomes kinked, it may be easily re-shaped by using a pair of flat end pliers/vise grips, being careful to clamp onto the part perpendicular to the kink. Slight pressure should be all that is necessary to re-shape the chiller. The chiller may be easily extended to fill more of the boil kettle by pulling gently upward on the coils.

“THE BEAST” is equipped with dual inlet & outlet ports for maximum chilling ability.

It is always wise procedure to check the unit for leaks before full service. Leaks may be overcome by tightening the clamps and or compression nuts.

We hope you enjoy brewing with our chiller and look forward to seeing you again on ebay, and please feel free to browse our website for great deals www.brewtree.com .